Break in instructions
Each time you buy new shoes or orthoses (orthotic devices, insert devices) it is important not only for your feet to get adjusted to this new environment gradually, but also your ankles, legs, knees, hips, and back. Shoes alter the bio-mechanics of your gait significantly. Orthotic devices of any type can alter the bio-mechanics of gait even more.
We suggest you wear your new shoes and/or orthotic devices no more than one hour at a time, two times a day the first two days. If you feel comfortable, increase to two hours, for the next two days. Continue this one-hour increase every other day for the next seven to ten days.
For athletic use, begin with 25% of your normal activity using your new orthotic devices and/or shoes. Upon each outing, increase the time in your new product 25%. For example: If you normally run 4 miles a day, you run in your new shoes and/or orthotic devices for 1 mile the first outing, then 2 miles the next outing, 3 miles and so on. If you become uncomfortable, cease wear for 1 to 2 days and then begin the break-in process again. It may take 3 to 4 weeks to become completely acclimated. The discomfort you may experience is normal and is the result of the added support necessary to reduce your pain.
Especially important for those with diabetes and/or neuropathy:
Be sure to examine your bare feet after the removal of your shoes and/or orthotic devices. If you notice any areas of concern (redness, blisters, rubbing) contact a health care professional immediately.
What to expect
Give all new products a chance to work. Most people report a 70% relief of their symptoms within the first 4 to 6 weeks of wearing their foot care products. However, it may take as long as you have had your symptoms to feel any relief.
We give you the casts of your feet. They are worth $50 toward another pair of semi-rigid or trilaminate orthoses. Plastazote orthoses are made directly to your feet, so there are no casts.
Care of the semi-rigid and rigid orthotic
Semi-Rigid and Rigid Orthotics
Our semi-rigid and rigid orthotic devices may be full foot, heel to ball or dress. They are generally covered in Spenco material because of its ability for shock absorption and protection from shearing. However, they may be covered in leather or another thin material. The bottom cover is made of pigskin for durability.
The heart of the orthoses is made of polypropylene, a semi-rigid to rigid plastic. Polypropylene will last for years and should not lose its contoured shape. However, you must replace the top covers from time to time.
Everyone wears their orthoses differently; some may need their top covers changed every six months and another person might not need a top cover for years.
To clean your orthoses, use mild soap and water with nylon brush and scrub. Be sure not to saturate with water and air-dry overnight. It is a good idea to remove your orthotic from your shoes every night so that air can dry each side, and reach the insoles of your shoes. This is especially important if you perspire heavily.
Care and life of Trilaminate orthoses
Trilaminate are made of three layers of materials: Puff, Poron, and cork used on the bottom for posting.
You should return every year to have a pedorthist check your Trilaminate to see if they are still functional. They should last between 1-2 years.
Clean with a soft cloth and soapy water.
Care and life of Plastazote Orthotic
Plastazote, sometimes referred to as soft tissue supplementation, comes in two densities. They are molded orthoses made of the softest density for cushion on top, with the firmer density on the bottom for support.
After 2 to 6 weeks of wear, they will mold into the contours of your feet. This gives us an “in gait” impression of where you bear the most weight in your feet.
We modify the orthoses to unload the high-pressure areas and reinforce the orthoses with Poron, the most shock-absorbent material available that will not compress.
Plastazote orthoses need to be replaced every 6 months to one year. To clean, use a damp cloth with mild soap cleaner.